Re: evolution-list Digest, Vol 140, Issue 6

classic Classic list List threaded Threaded
11 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: evolution-list Digest, Vol 140, Issue 6

Jim Engle


Milan and Andre:

Thanks for both responses to my post.  I have used evolution for many
years on various versions of Ubuntu, but am new to evolution-list.  I
just found the site when looking for a fix for the printing issue.  When
I replied to your message, I used evolution and reply to sender, however
I changed the subject line, trying to follow the instructions that
evolution-list includes at the beginning of each message.  This time I
used
Ctrl+L and did not change the subject line.  I hope it works better for
you, Milan.

Before trying to run evolution through the terminal again, I opened
evolution the normal way from Ubuntu's dash and tried to print an HTML
message.  Evolution closed after I clicked print in the print dialog
box.

Next, I ran evolution from terminal, which worked OK after I included
--ex r in the command.  Sorry about that.  Printing was successful for
both HTML and Plain Text and I could not make evolution crash.  I used
File Close to close evolution and the terminal indicated that it closed
normally.  

I then opened evolution from Ubuntu's dash and everything prints
normally.  I can not make the program crash when I print either HTML or
Plain Text.  I am at a loss to explain this result, yet evolution
appears to work OK.

Andre, you said that installing the corresponding debug packages is
welcome.  Do you suggest that I install additional packages?  If so,
please give or point me to specific instruction.  Do you still recommend
that I obtain a stacktrace?

Milan, following is the backtrace of all threads:


jim@jim-Nobilis:~$ gdb evolution --ex r --ex bt --ex "t a a bt" --ex q
GNU gdb (Ubuntu 7.7.1-0ubuntu5~14.04.2) 7.7.1
Copyright (C) 2014 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from evolution...Reading symbols from /usr/lib/debug/.build-id/56/7b7c93c7b31b792abd81b27731b9f98a980e1a.debug...done.
done.
Starting program: /usr/bin/evolution
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
[New Thread 0x7fffdff3b700 (LWP 6739)]
[New Thread 0x7fffdf73a700 (LWP 6740)]
[New Thread 0x7fffdcfff700 (LWP 6741)]
[New Thread 0x7fffcffff700 (LWP 6742)]

(evolution:6735): camel-WARNING **: Failed to initialize NSS SQL database in sql:/etc/pki/nssdb: NSS error -8126
[New Thread 0x7fffc06f9700 (LWP 6743)]
[New Thread 0x7fffbe8b4700 (LWP 6746)]
[New Thread 0x7fffbe0b3700 (LWP 6747)]
[New Thread 0x7fffbd4a9700 (LWP 6748)]
[New Thread 0x7fffbcca8700 (LWP 6751)]
[New Thread 0x7fffb519a700 (LWP 6752)]
[New Thread 0x7fffb4999700 (LWP 6753)]
[Thread 0x7fffbe0b3700 (LWP 6747) exited]
[Thread 0x7fffb4999700 (LWP 6753) exited]
[Thread 0x7fffb519a700 (LWP 6752) exited]
[Thread 0x7fffbcca8700 (LWP 6751) exited]
[New Thread 0x7fffbcca8700 (LWP 6757)]
[New Thread 0x7fffb519a700 (LWP 6758)]
[New Thread 0x7fffb4999700 (LWP 6759)]
[New Thread 0x7fffbe0b3700 (LWP 6760)]
[Thread 0x7fffbe0b3700 (LWP 6760) exited]
[New Thread 0x7fffbe0b3700 (LWP 6761)]
[New Thread 0x7fff5fffd700 (LWP 6762)]
[New Thread 0x7fff5e83a700 (LWP 6766)]
[New Thread 0x7fff5e039700 (LWP 6767)]
[New Thread 0x7fff5d838700 (LWP 6768)]
java version "1.7.0_121"
OpenJDK Runtime Environment (IcedTea 2.6.8) (7u121-2.6.8-1ubuntu0.14.04.3)
OpenJDK 64-Bit Server VM (build 24.121-b00, mixed mode)

(evolution:6735): GLib-CRITICAL **: Source ID 1228 was not found when attempting to remove it

(evolution:6735): GLib-CRITICAL **: Source ID 1249 was not found when attempting to remove it
[New Thread 0x7fff59dd5700 (LWP 6783)]
[New Thread 0x7fff595d4700 (LWP 6784)]
[New Thread 0x7fff58dd3700 (LWP 6785)]
[New Thread 0x7fff4bfff700 (LWP 6786)]
[Thread 0x7fffbe8b4700 (LWP 6746) exited]
[Thread 0x7fffc06f9700 (LWP 6743) exited]
[Thread 0x7fffbcca8700 (LWP 6757) exited]
[Thread 0x7fffbd4a9700 (LWP 6748) exited]
[Thread 0x7fffb4999700 (LWP 6759) exited]
[New Thread 0x7fffb4999700 (LWP 6787)]
[New Thread 0x7fffbd4a9700 (LWP 6788)]
[Thread 0x7fffb519a700 (LWP 6758) exited]
[New Thread 0x7fffb519a700 (LWP 6789)]
[New Thread 0x7fffbcca8700 (LWP 6790)]
[New Thread 0x7fffc06f9700 (LWP 6791)]
[New Thread 0x7fff4a87b700 (LWP 6792)]
[New Thread 0x7fff4a07a700 (LWP 6793)]
[New Thread 0x7fff49879700 (LWP 6794)]
[New Thread 0x7fff49078700 (LWP 6795)]
[New Thread 0x7fff48877700 (LWP 6796)]
[New Thread 0x7fff33fff700 (LWP 6797)]
[New Thread 0x7fff337fe700 (LWP 6798)]
[New Thread 0x7fff32ffd700 (LWP 6799)]
[New Thread 0x7fff327fc700 (LWP 6800)]
[New Thread 0x7fff31ffb700 (LWP 6801)]
[New Thread 0x7fff317fa700 (LWP 6802)]
[New Thread 0x7fff30ff9700 (LWP 6803)]
[New Thread 0x7fff17fff700 (LWP 6804)]
[New Thread 0x7fff177fe700 (LWP 6805)]
[New Thread 0x7fff16ffd700 (LWP 6806)]
[New Thread 0x7fff167fc700 (LWP 6807)]
[New Thread 0x7fff15ffb700 (LWP 6808)]
[New Thread 0x7fff157fa700 (LWP 6809)]
[New Thread 0x7fff14ff9700 (LWP 6810)]
[New Thread 0x7ffefbfff700 (LWP 6811)]
[New Thread 0x7ffefb7fe700 (LWP 6812)]
[New Thread 0x7ffefaffd700 (LWP 6813)]
[New Thread 0x7ffefa7fc700 (LWP 6814)]
[New Thread 0x7ffef9ffb700 (LWP 6815)]
[New Thread 0x7ffef97fa700 (LWP 6816)]
[New Thread 0x7ffef8ff9700 (LWP 6817)]
[Thread 0x7fffbcca8700 (LWP 6790) exited]
[Thread 0x7fff16ffd700 (LWP 6806) exited]
[Thread 0x7fff4a87b700 (LWP 6792) exited]
[Thread 0x7fff327fc700 (LWP 6800) exited]
[Thread 0x7fff317fa700 (LWP 6802) exited]
[Thread 0x7fff177fe700 (LWP 6805) exited]
[Thread 0x7fff167fc700 (LWP 6807) exited]
[Thread 0x7ffef8ff9700 (LWP 6817) exited]
[Thread 0x7fff49078700 (LWP 6795) exited]
[Thread 0x7fffb4999700 (LWP 6787) exited]
[Thread 0x7fffc06f9700 (LWP 6791) exited]
[Thread 0x7fffb519a700 (LWP 6789) exited]
[Thread 0x7fff49879700 (LWP 6794) exited]
[Thread 0x7fff337fe700 (LWP 6798) exited]
[Thread 0x7fff31ffb700 (LWP 6801) exited]
[Thread 0x7fff4a07a700 (LWP 6793) exited]
[Thread 0x7fff30ff9700 (LWP 6803) exited]
[Thread 0x7fff17fff700 (LWP 6804) exited]
[Thread 0x7fff48877700 (LWP 6796) exited]
[Thread 0x7fff14ff9700 (LWP 6810) exited]
[Thread 0x7fff15ffb700 (LWP 6808) exited]
[Thread 0x7ffefbfff700 (LWP 6811) exited]
[Thread 0x7ffefaffd700 (LWP 6813) exited]
[Thread 0x7ffefb7fe700 (LWP 6812) exited]
[Thread 0x7ffefa7fc700 (LWP 6814) exited]
[Thread 0x7fff33fff700 (LWP 6797) exited]
[Thread 0x7ffef97fa700 (LWP 6816) exited]
[Thread 0x7ffef9ffb700 (LWP 6815) exited]
[Thread 0x7fff157fa700 (LWP 6809) exited]
[New Thread 0x7fff157fa700 (LWP 6818)]
[New Thread 0x7ffef9ffb700 (LWP 6819)]
[Thread 0x7ffef9ffb700 (LWP 6819) exited]
[Thread 0x7fff157fa700 (LWP 6818) exited]
[New Thread 0x7fff157fa700 (LWP 6821)]
[New Thread 0x7ffef9ffb700 (LWP 6822)]
[New Thread 0x7ffef97fa700 (LWP 6823)]
[Thread 0x7ffef9ffb700 (LWP 6822) exited]
[Thread 0x7fff157fa700 (LWP 6821) exited]
[Thread 0x7fff32ffd700 (LWP 6799) exited]
[New Thread 0x7fff32ffd700 (LWP 6870)]
[New Thread 0x7fff157fa700 (LWP 6871)]
[New Thread 0x7ffef9ffb700 (LWP 6872)]
[New Thread 0x7fff33fff700 (LWP 6873)]
[New Thread 0x7fff4a87b700 (LWP 6874)]
[Thread 0x7fff157fa700 (LWP 6871) exited]
[Thread 0x7ffef9ffb700 (LWP 6872) exited]
[Thread 0x7fff33fff700 (LWP 6873) exited]
[Thread 0x7fff32ffd700 (LWP 6870) exited]
[Thread 0x7ffef97fa700 (LWP 6823) exited]
[New Thread 0x7ffef97fa700 (LWP 6876)]
[New Thread 0x7fff32ffd700 (LWP 6877)]
[New Thread 0x7fff33fff700 (LWP 6878)]
[New Thread 0x7ffef9ffb700 (LWP 6879)]
[New Thread 0x7fff4a07a700 (LWP 6880)]
[Thread 0x7fff4a07a700 (LWP 6880) exited]
[Thread 0x7fff4a87b700 (LWP 6874) exited]
[Thread 0x7fff33fff700 (LWP 6878) exited]
[Thread 0x7ffef9ffb700 (LWP 6879) exited]
[Thread 0x7ffef97fa700 (LWP 6876) exited]
[Thread 0x7fff32ffd700 (LWP 6877) exited]
[New Thread 0x7fff32ffd700 (LWP 7027)]
[New Thread 0x7ffef97fa700 (LWP 7028)]
[New Thread 0x7ffef9ffb700 (LWP 7029)]
[New Thread 0x7fff33fff700 (LWP 7030)]
[Thread 0x7fff33fff700 (LWP 7030) exited]
[Thread 0x7ffef97fa700 (LWP 7028) exited]
[Thread 0x7ffef9ffb700 (LWP 7029) exited]
[Thread 0x7fff32ffd700 (LWP 7027) exited]
[New Thread 0x7fff32ffd700 (LWP 7033)]
[New Thread 0x7ffef9ffb700 (LWP 7034)]
[Thread 0x7fff32ffd700 (LWP 7033) exited]
[New Thread 0x7fff32ffd700 (LWP 7048)]
[New Thread 0x7ffef97fa700 (LWP 7049)]
[New Thread 0x7fff33fff700 (LWP 7050)]
[New Thread 0x7fff4a87b700 (LWP 7051)]
[New Thread 0x7fff4a07a700 (LWP 7052)]
[New Thread 0x7fff49879700 (LWP 7053)]
[New Thread 0x7fff49078700 (LWP 7054)]
[New Thread 0x7fff48877700 (LWP 7055)]
[New Thread 0x7fff337fe700 (LWP 7056)]
[New Thread 0x7fff327fc700 (LWP 7057)]
[New Thread 0x7fff31ffb700 (LWP 7058)]
[New Thread 0x7fff317fa700 (LWP 7059)]
[New Thread 0x7fff30ff9700 (LWP 7060)]
[New Thread 0x7fff17fff700 (LWP 7061)]
[New Thread 0x7fff177fe700 (LWP 7062)]
[Thread 0x7fff31ffb700 (LWP 7058) exited]
[Thread 0x7fff177fe700 (LWP 7062) exited]
[Thread 0x7fff49879700 (LWP 7053) exited]
[Thread 0x7fff30ff9700 (LWP 7060) exited]
[Thread 0x7fff337fe700 (LWP 7056) exited]
[Thread 0x7fff4a87b700 (LWP 7051) exited]
[Thread 0x7fff33fff700 (LWP 7050) exited]
[Thread 0x7fff4a07a700 (LWP 7052) exited]
[Thread 0x7ffef9ffb700 (LWP 7034) exited]
[Thread 0x7ffef97fa700 (LWP 7049) exited]
[Thread 0x7fff317fa700 (LWP 7059) exited]
[Thread 0x7fff32ffd700 (LWP 7048) exited]
[Thread 0x7fff17fff700 (LWP 7061) exited]
[Thread 0x7fff49078700 (LWP 7054) exited]
[Thread 0x7fff327fc700 (LWP 7057) exited]
[Thread 0x7fff48877700 (LWP 7055) exited]
[New Thread 0x7fff48877700 (LWP 7164)]
[New Thread 0x7fff327fc700 (LWP 7165)]
[New Thread 0x7fff49078700 (LWP 7166)]
[Thread 0x7fff5fffd700 (LWP 6762) exited]
[Thread 0x7fffbd4a9700 (LWP 6788) exited]
[Thread 0x7fff49078700 (LWP 7166) exited]
[Thread 0x7fff327fc700 (LWP 7165) exited]
[Thread 0x7fff48877700 (LWP 7164) exited]
[Thread 0x7fff4bfff700 (LWP 6786) exited]
[Thread 0x7fff58dd3700 (LWP 6785) exited]
[Thread 0x7fff595d4700 (LWP 6784) exited]
[Thread 0x7fff59dd5700 (LWP 6783) exited]
[Thread 0x7fff5d838700 (LWP 6768) exited]
[Thread 0x7fff5e039700 (LWP 6767) exited]
[Thread 0x7fff5e83a700 (LWP 6766) exited]
[Thread 0x7fffbe0b3700 (LWP 6761) exited]
[Thread 0x7fffcffff700 (LWP 6742) exited]
[Thread 0x7fffdcfff700 (LWP 6741) exited]
[Thread 0x7fffdf73a700 (LWP 6740) exited]
[Thread 0x7fffdff3b700 (LWP 6739) exited]
[Inferior 1 (process 6735) exited normally]
No stack.
jim@jim-Nobilis:~$
 
I will end by saying Thank You to both Milan and Andre.  Your willingness to give of your time and expertise is greatly appreciated.

Regards,

Jim



On Fri, 2017-03-10 at 12:00 +0000, [hidden email]
wrote:

> Send evolution-list mailing list submissions to
> [hidden email]
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://mail.gnome.org/mailman/listinfo/evolution-list
> or, via email, send a message with subject or body 'help' to
> [hidden email]
>
> You can reach the person managing the list at
> [hidden email]
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of evolution-list digest..."
>
>
> Important: do NOT reply directly to this digest. If you wish to reply to a component message, use your mailer's facility for this. In Evolution: right-click and select from the pop-up menu, or use the drop-down menu at the top of each message if available.
>
> Today's Topics:
>
>    1. Re:  Evolution Closes When I Try to Print (Jim Engle)
>    2. Re:  Evolution Closes When I Try to Print (Andre Klapper)
>    3. Re:  Evolution Closes When I Try to Print (Milan Crha)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Thu, 09 Mar 2017 13:40:43 -0600
> From: Jim Engle <[hidden email]>
> To: [hidden email]
> Subject: Re: [Evolution] Evolution Closes When I Try to Print
> Message-ID: <1489088443.26230.7.camel@jim-Nobilis>
> Content-Type: text/plain; charset="UTF-8"
>
>
>
> Thank you Milan:
>
> I appreciate your kind offer to help and hope that I am using the
> correct procedure to respond.
>
> You indicate that I am using an ancient version of evolution (3.10.4).
> This is the version that the Ubuntu team packaged for Ubuntu 14.04.
> There can be dependency issues that cause additional problems if a user
> tries to upgrade an application to a version not supported by the OS.  I
> did a little more research in Ubuntu help sites and found a post that
> describes the dependency issues here:
> http://askubuntu.com/questions/755985/getting-latest-version-of-evolution-on-ubuntu-14-04
>
> The post describes the problematic issue as:
>
> "The problem is that Gnome programs generally is they depend on other
> parts of Gnome to work properly - since 14.04 uses Gnome 3.10 as a base
> version it becomes difficult to install some Gnome programs for 3.8,
> 3.12, 3.16 etc as they may break as they don't have the right libraries
> etc available (unless patched) - and trying to install those libraries
> which in turn probably will break Unity and other Gnome apps.... see
> dependency hell.  You can get Evolution 3.16 in 15.10 Wily, and if you
> wait two weeks you can get 3.18 in 16.04 (also a LTS like 14.04, but
> still in beta currently).  If you really want to, you can try installing
> the packages for 14.10 (may break stuff, I recommend backing Evolution's
> data before doing it) by adding the a different entry for the PPA"
>
> I am aware that I should upgrade my operating system to the latest
> stable LTS version (16.04), and will be doing that soon.  It will
> include a more current version of Evolution.  It takes substantial time
> to set up a new system and get all of my applications installed, so I
> was hoping to find a quick fix for the evolution printing issue.
>
> I am comfortable using the terminal if I have step-by-step instructions,
> and will be happy to provide the output that you suggest.  I have
> installed evolution-dbg and evolution-data-server-dbg, but do not know
> for sure if I have the gtkhtml3 that you requested.  (I can't find info
> on that.)  Here is the output of dpkg -l "*gtk*" | grep ii
>
>  
> jim@jim-Nobilis:~$ dpkg -l "*gtk*" | grep ii
> ii  apport-gtk
> 2.14.1-0ubuntu3.23                                  all          GTK+
> frontend for the apport crash report system
> ii  gir1.2-gtk-3.0
> 3.10.8-0ubuntu1.6                                   amd64        GTK+
> graphical user interface library -- gir bindings
> ii  gir1.2-gtkclutter-1.0
> 1.4.4-3ubuntu2.2                                    amd64        GObject
> introspection data for the GTK+ Clutter library
> ii  gir1.2-gtksource-3.0
> 3.10.2-0ubuntu1                                     amd64        gir
> files for the GTK+ syntax highlighting widget
> ii  gir1.2-javascriptcoregtk-3.0
> 2.4.10-0ubuntu0.14.04.1                             amd64
> JavaScript engine library from WebKitGTK+ - GObject introspection data
> ii  gtk2-engines-murrine:amd64
> 0.98.2-0ubuntu2                                     amd64
> cairo-based gtk+-2.0 theme engine
> ii  gtk2-engines-murrine:i386
> 0.98.2-0ubuntu2                                     i386
> cairo-based gtk+-2.0 theme engine
> ii  gtk2-engines-pixbuf:i386
> 2.24.23-0ubuntu1.4                                  i386
> pixbuf-based theme for GTK+ 2.x
> ii  gtk3-engines-unico:amd64                                    1.0.3
> +14.04.20140109-0ubuntu1                       amd64        Unico Gtk+ 3
> theme engine
> ii  ibus-gtk:amd64
> 1.5.5-1ubuntu3.2                                    amd64
> Intelligent Input Bus - GTK+2 support
> ii  ibus-gtk3:amd64
> 1.5.5-1ubuntu3.2                                    amd64
> Intelligent Input Bus - GTK+3 support
> ii  libcanberra-gtk-module:amd64
> 0.30-0ubuntu3                                       amd64
> translates GTK+ widgets signals to event sounds
> ii  libcanberra-gtk0:amd64
> 0.30-0ubuntu3                                       amd64        GTK+
> helper for playing widget event sounds with libcanberra
> ii  libcanberra-gtk3-0:amd64
> 0.30-0ubuntu3                                       amd64        GTK+
> 3.0 helper for playing widget event sounds with libcanberra
> ii  libcanberra-gtk3-module:amd64
> 0.30-0ubuntu3                                       amd64
> translates GTK3 widgets signals to event sounds
> ii  libcheese-gtk23:amd64
> 3.10.2-0ubuntu2                                     amd64        tool to
> take pictures and videos from your webcam - widgets
> ii  libclutter-gtk-1.0-0:amd64
> 1.4.4-3ubuntu2.2                                    amd64        Open GL
> based interactive canvas library GTK+ widget
> ii  libdbusmenu-gtk3-4:amd64                                    12.10.3
> +14.04.20140612-0ubuntu1                     amd64        library for
> passing menus over DBus - GTK+ version
> ii  libdbusmenu-gtk4:amd64                                      12.10.3
> +14.04.20140612-0ubuntu1                     amd64        library for
> passing menus over DBus - GTK+ version
> ii  libgtk-3-0:amd64
> 3.10.8-0ubuntu1.6                                   amd64        GTK+
> graphical user interface library
> ii  libgtk-3-bin
> 3.10.8-0ubuntu1.6                                   amd64
> programs for the GTK+ graphical user interface library
> ii  libgtk-3-common
> 3.10.8-0ubuntu1.6                                   all          common
> files for the GTK+ graphical user interface library
> ii  libgtk-sharp-beans-cil                                      2.14.1-3
> all          Supplementary CLI bindings for GTK 2.14+
> ii  libgtk2-perl
> 2:1.249-2                                           amd64        Perl
> interface to the 2.x series of the Gimp Toolkit library
> ii  libgtk2.0-0:amd64
> 2.24.23-0ubuntu1.4                                  amd64        GTK+
> graphical user interface library
> ii  libgtk2.0-0:i386
> 2.24.23-0ubuntu1.4                                  i386         GTK+
> graphical user interface library
> ii  libgtk2.0-bin
> 2.24.23-0ubuntu1.4                                  amd64
> programs for the GTK+ graphical user interface library
> ii  libgtk2.0-cil
> 2.12.10-5                                           amd64        CLI
> binding for the GTK+ toolkit 2.12
> ii  libgtk2.0-common
> 2.24.23-0ubuntu1.4                                  all          common
> files for the GTK+ graphical user interface library
> ii  libgtkglext1
> 1.2.0-3.1fakesync3                                  amd64        OpenGL
> Extension to GTK+ (shared libraries)
> ii  libgtkhtml-4.0-0
> 4.6.6-2ubuntu1                                      amd64        HTML
> rendering/editing library - runtime files
> ii  libgtkhtml-4.0-common
> 4.6.6-2ubuntu1                                      all          HTML
> rendering/editing library - common data
> ii  libgtkhtml-editor-4.0-0
> 4.6.6-2ubuntu1                                      amd64        HTML
> rendering/editing library - editor widget
> ii  libgtkmm-2.4-1c2a:amd64
> 1:2.24.4-1ubuntu1                                   amd64        C++
> wrappers for GTK+ (shared libraries)
> ii  libgtkmm-3.0-1:amd64
> 3.10.1-0ubuntu2                                     amd64        C++
> wrappers for GTK+ (shared libraries)
> ii  libgtksourceview-3.0-1:amd64
> 3.10.2-0ubuntu1                                     amd64        shared
> libraries for the GTK+ syntax highlighting widget
> ii  libgtksourceview-3.0-common
> 3.10.2-0ubuntu1                                     all          common
> files for the GTK+ syntax highlighting widget
> ii  libgtkspell0
> 2.0.16-1ubuntu7                                     amd64        a
> spell-checking addon for GTK's TextView widget
> ii  libjavascriptcoregtk-1.0-0:amd64
> 2.4.10-0ubuntu0.14.04.1                             amd64
> JavaScript engine library from WebKitGTK+
> ii  libjavascriptcoregtk-3.0-0:amd64
> 2.4.10-0ubuntu0.14.04.1                             amd64
> JavaScript engine library from WebKitGTK+
> ii  libnm-gtk-common
> 0.9.8.8-0ubuntu4.5                                  all          network
> management framework (common files for wifi and mobile)
> ii  libnm-gtk0
> 0.9.8.8-0ubuntu4.5                                  amd64        network
> management framework (GNOME dialogs for wifi and mobile)
> ii  libreoffice-gtk
> 1:4.2.8-0ubuntu5                                    amd64        office
> productivity suite -- GTK+ integration
> ii  libunity-gtk2-parser0:amd64                                 0.0.0
> +14.04.20141212-0ubuntu1                       amd64        GtkMenuShell
> to GMenuModel parser
> ii  libunity-gtk3-parser0:amd64                                 0.0.0
> +14.04.20141212-0ubuntu1                       amd64        GtkMenuShell
> to GMenuModel parser
> ii  libwebkitgtk-1.0-0:amd64
> 2.4.10-0ubuntu0.14.04.1                             amd64        Web
> content engine library for GTK+
> ii  libwebkitgtk-1.0-common
> 2.4.10-0ubuntu0.14.04.1                             all          Web
> content engine library for GTK+ - data files
> ii  libwebkitgtk-3.0-0:amd64
> 2.4.10-0ubuntu0.14.04.1                             amd64        Web
> content engine library for GTK+
> ii  libwebkitgtk-3.0-common
> 2.4.10-0ubuntu0.14.04.1                             all          Web
> content engine library for GTK+ - data files
> ii  libwmf0.2-7-gtk
> 0.2.8.4-10.3ubuntu1.14.04.1                         amd64        Windows
> metafile conversion library
> ii  overlay-scrollbar-gtk2:amd64                                0.2.16
> +r359+14.04.20131129-0ubuntu1                 amd64        GTK 2 module
> for overlay scrollbars
> ii  overlay-scrollbar-gtk3:amd64                                0.2.16
> +r359+14.04.20131129-0ubuntu1                 amd64        GTK 3 module
> for overlay scrollbars
> ii  python-aptdaemon.gtk3widgets
> 1.1.1-1ubuntu5.2                                    all          Python
> 2 GTK+ 3 widgets to run an aptdaemon client
> ii  python-gtk2
> 2.24.0-3ubuntu3                                     amd64        Python
> bindings for the GTK+ widget set
> ii  python3-aptdaemon.gtk3widgets
> 1.1.1-1ubuntu5.2                                    all          Python
> 3 GTK+ 3 widgets to run an aptdaemon client
> ii  software-properties-gtk
> 0.92.37.7                                           all          manage
> the repositories that you install software from (gtk)
> ii  transmission-gtk
> 2.82-1.1ubuntu3.1                                   amd64
> lightweight BitTorrent client (GTK+ interface)
> ii  ubuntu-release-upgrader-gtk
> 1:0.220.9                                           all          manage
> release upgrades
> ii  unity-gtk-module-common                                     0.0.0
> +14.04.20141212-0ubuntu1                       all          Common files
> for GtkMenuShell D-Bus exporter
> ii  unity-gtk2-module:amd64                                     0.0.0
> +14.04.20141212-0ubuntu1                       amd64        GtkMenuShell
> D-Bus exporter
> ii  unity-gtk3-module:amd64                                     0.0.0
> +14.04.20141212-0ubuntu1                       amd64        GtkMenuShell
> D-Bus exporter
> ii  usb-creator-gtk
> 0.2.56.3ubuntu0.1                                   amd64        create
> a startup disk using a CD or disc image (for GNOME)
> ii  xdg-user-dirs-gtk
> 0.10-1ubuntu1                                       amd64        tool to
> manage well known user directories (Gtk extension)
> jim@jim-Nobilis:~$
>
>
> I tried to run Evolution from the terminal, which failed.  This is the output:
>
> jim@jim-Nobilis:~$ gdb evolution --ex bt --ex "t a a bt" --ex q
> GNU gdb (Ubuntu 7.7.1-0ubuntu5~14.04.2) 7.7.1
> Copyright (C) 2014 Free Software Foundation, Inc.
> License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
> This is free software: you are free to change and redistribute it.
> There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
> and "show warranty" for details.
> This GDB was configured as "x86_64-linux-gnu".
> Type "show configuration" for configuration details.
> For bug reporting instructions, please see:
> <http://www.gnu.org/software/gdb/bugs/>.
> Find the GDB manual and other documentation resources online at:
> <http://www.gnu.org/software/gdb/documentation/>.
> For help, type "help".
> Type "apropos word" to search for commands related to "word"...
> Reading symbols from evolution...Reading symbols from /usr/lib/debug/.build-id/56/7b7c93c7b31b792abd81b27731b9f98a980e1a.debug...done.
> done.
> No stack.
> jim@jim-Nobilis:~$ gdb evolution --ex bt --ex "t a a bt" --ex q
>
>
>
> I am not sure what to try next.
>
> Thank you,
>
> Jim
>
>
>
>
>
> On Thu, 2017-03-09 at 12:00 +0000, [hidden email]
> wrote:
> > Send evolution-list mailing list submissions to
> > [hidden email]
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> > https://mail.gnome.org/mailman/listinfo/evolution-list
> > or, via email, send a message with subject or body 'help' to
> > [hidden email]
> >
> > You can reach the person managing the list at
> > [hidden email]
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of evolution-list digest..."
> >
> >
> > Important: do NOT reply directly to this digest. If you wish to reply to a component message, use your mailer's facility for this. In Evolution: right-click and select from the pop-up menu, or use the drop-down menu at the top of each message if available.
> >
> > Today's Topics:
> >
> >    1.  Evolution Closes When I Try to Print (Jim Engle)
> >    2. Re:  Evolution Closes When I Try to Print (Milan Crha)
> >
> >
> > ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Wed, 08 Mar 2017 18:30:03 -0600
> > From: Jim Engle <[hidden email]>
> > To: [hidden email]
> > Subject: [Evolution] Evolution Closes When I Try to Print
> > Message-ID: <1489019403.2777.14.camel@jim-laptop>
> > Content-Type: text/plain; charset="UTF-8"
> >
> > Hi All:
> >
> > I have been happy to use Evolution Mail and Calendar in various versions
> > of Ubuntu for many years.  
> >
> > I am currently using Evolution 3.10.4 on Ubuntu 14.04 LTS.  Today
> > evolution crashes (closes) every time I try to print a message.  The
> > print dialog box opens and when I click print evolution closes.  I can
> > print from all of my other applications.  I have closed evolution, shut
> > down the computer, and started the pc again.  I have even uninstalled
> > Evolution through the software center, restarted the computer, and
> > installed Evolution again. Evolution still closes when I try to print.
> >
> > I am new to evolution-list, but have searched for similar issues and
> > found the following posts but did not find a resolution for the issue:
> >  
> > https://mail.gnome.org/archives/evolution-list/2007-December/msg00025.html
> >
> > https://mail.gnome.org/archives/gnome-print-list/2004-February/msg00004.html
> >
> >  
> > Is there anyone out there who has had this issue resolved?  
> >
> > Or, Does anyone have a suggested fix?
> >
> >
> > Thank you.
> >
> > Jim Engle
> >
> >
> >
> > ------------------------------
> >
> > Message: 2
> > Date: Thu, 09 Mar 2017 10:02:42 +0100
> > From: Milan Crha <[hidden email]>
> > To: [hidden email]
> > Subject: Re: [Evolution] Evolution Closes When I Try to Print
> > Message-ID: <[hidden email]>
> > Content-Type: text/plain; charset="UTF-8"
> >
> > On Wed, 2017-03-08 at 18:30 -0600, Jim Engle wrote:
> > > I am currently using Evolution 3.10.4 on Ubuntu 14.04 LTS.  Today
> > > evolution crashes (closes) every time I try to print a message.  The
> > > print dialog box opens and when I click print evolution closes.
> >
> > Hi,
> > there can be many reasons why the application crashed, thus it's really
> > hard to guess from your description where the problem can be and/or
> > whether any possible fix is available. Nonetheless, you can give some
> > clues, which will help. Please, install debuginfo packages for
> > evolution-data-server, evolution and as you use such ancient version
> > also gtkhtml3 (I've no idea of exact package names in Ubuntu, I'm
> > sorry, I do not use it). Then run evolution from a terminal under gdb
> > and reproduce the crash. The command looks like this:
> >
> >    $ gdb evolution --ex r --ex bt --ex "t a a bt" --ex q
> >
> > It will run the evolution and once the execution stops, hopefully due
> > to the crash, then it'll print the backtrace of the crashing thread and
> > afterwards also backtrace of all threads. Gather the console output
> > from the crash to see where it crashed. Please check the output for any
> > private information, like passwords, email address, server
> > addresses,... I usually search for "pass" at least (quotes for clarity
> > only).
> >
> > By the way, does it crash for all messages, HTML and plain (this one is
> > plain text), or only for certain messages?
> > Bye,
> > Milan
> >
> >
> > ------------------------------
> >
> > Subject: Digest Footer
> >
> > _______________________________________________
> > evolution-list mailing list
> > [hidden email]
> > https://mail.gnome.org/mailman/listinfo/evolution-list
> >
> >
> > ------------------------------
> >
> > End of evolution-list Digest, Vol 140, Issue 5
> > **********************************************
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Thu, 09 Mar 2017 21:31:31 +0100
> From: Andre Klapper <[hidden email]>
> To: [hidden email]
> Subject: Re: [Evolution] Evolution Closes When I Try to Print
> Message-ID: <[hidden email]>
> Content-Type: text/plain; charset="UTF-8"
>
> Hi Jim,
>
> (Please remove unneeded quotes when replying to messages. Thanks!)
>
> On Thu, 2017-03-09 at 13:40 -0600, Jim Engle wrote:
> > You indicate that I am using an ancient version of evolution (3.10.4).
> > This is the version that the Ubuntu team packaged for Ubuntu 14.04.
>
> Your elaboration on dependencies between packages is correct. I think
> Milan only mention that 3.10 is ancient to explain why debug packages
> for gtkhtml are also of interest, as 3.10 still depended on gtkhtml.
>
> > I am comfortable using the terminal if I have step-by-step instructions,
> > and will be happy to provide the output that you suggest.??I have
> > installed evolution-dbg and evolution-data-server-dbg, but do not know
> > for sure if I have the gtkhtml3 that you requested.??(I can't find info
> > on that.)??Here is the output of dpkg -l "*gtk*" | grep ii?
>
> The relevant parts (libgtkhtml package names) are here:
>
> > ii??libgtkhtml-4.0-0
> > 4.6.6-2ubuntu1??????????????????????????????????????amd64????????HTML
> > rendering/editing library - runtime files
> > ii??libgtkhtml-4.0-common
> > 4.6.6-2ubuntu1??????????????????????????????????????all??????????HTML
> > rendering/editing library - common data
> > ii??libgtkhtml-editor-4.0-0
> > 4.6.6-2ubuntu1??????????????????????????????????????amd64????????HTML
> > rendering/editing library - editor widget
>
> Installing the corresponding debug packages is welcome.
>
> Next step is to get a stacktrace in gdb. A more verbose how-to is here:
> https://wiki.gnome.org/Community/GettingInTouch/Bugzilla/GettingTraces/Details#Obtaining_a_stack_trace_using_GDB
>
> Cheers,
> andre


_______________________________________________
evolution-list mailing list
[hidden email]
To change your list options or unsubscribe, visit ...
https://mail.gnome.org/mailman/listinfo/evolution-list
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: evolution-list Digest, Vol 140, Issue 6

Patrick O'Callaghan
On Fri, 2017-03-10 at 21:54 -0600, Jim Engle wrote:
>  When
> I replied to your message, I used evolution and reply to sender, however
> I changed the subject line, trying to follow the instructions that
> evolution-list includes at the beginning of each message.  This time I
> used
> Ctrl+L and did not change the subject line.  I hope it works better for
> you, Milan.

I'm afraid it didn't, for several reasons. Since you say you are new to
mailing lists, allow me to explain a few things:

1) You replied to a digest. Never, *never* do this. Your reply included
the entire text of all the messages in the digest, even ones completely
unrelated to your thread. If you absolutely must use digests, you can
reply to an individual message by right-clicking within the message
body. However it's really much better just to avoid digests altogether,
 as they have no advantages in modern systems (they still exist as a
throwback to the days of modems and UUCP). Note that changing the
subject line is not the way to deal with this.

2) You top-posted your reply, i.e. your comments are in front of the
the material you are quoting. Although this is common practice in the
business world (due to the pernicious influence of Outlook), it's
generally frowned on in technical mailing lists including this one. You
should insert comments after the specific text you want to comment on.

3) In that same vein, don't quote a lot of stuff that you aren't
commenting on, i.e. be selective. There's no need to quote the entire
message you reply to (even without using digests). That's what the list
archive is for, and what threading exists to support.

Welcome to the list :-)

poc
_______________________________________________
evolution-list mailing list
[hidden email]
To change your list options or unsubscribe, visit ...
https://mail.gnome.org/mailman/listinfo/evolution-list
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: evolution-list Digest, Vol 140, Issue 6

Milan Crha
On Sat, 2017-03-11 at 11:26 +0000, Patrick O'Callaghan wrote:
> Since you say you are new to mailing lists

        Hi,
I thought the default for the list is to not use the digest, thus the
new subscribers receive messages separately, unless they change it for
whatever reason. I think I heard so several months ago, but I can be
wrong.
        Bye,
        Milan
_______________________________________________
evolution-list mailing list
[hidden email]
To change your list options or unsubscribe, visit ...
https://mail.gnome.org/mailman/listinfo/evolution-list
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Evolution Closes When I Try to Print (was: Re: evolution-list Digest, Vol 140, Issue 6)

Milan Crha
In reply to this post by Jim Engle
On Fri, 2017-03-10 at 21:54 -0600, Jim Engle wrote:
> I hope it works better for you, Milan.

        Hi,
ah, I see, digests. Separate messages are better, at least for me, as
Patrick said. Maybe change the option at the bottom of:
https://mail.gnome.org/mailman/listinfo/evolution-list

> Next, I ran evolution from terminal, which worked OK after I included
> --ex r in the command.  Sorry about that.  Printing was successful for
> both HTML and Plain Text and I could not make evolution crash.  I used
> File Close to close evolution and the terminal indicated that it closed
> normally.  

Could it be specific to certain message? It sounds like it. The gdb
output is not that useful if the application didn't crash (which was
the gdb supposed to catch). Maybe if you'll find a way to reproduce
then consider re-sending the gdb output.
        Thanks and bye,
        Milan
_______________________________________________
evolution-list mailing list
[hidden email]
To change your list options or unsubscribe, visit ...
https://mail.gnome.org/mailman/listinfo/evolution-list
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: evolution-list Digest, Vol 140, Issue 6

Patrick O'Callaghan
In reply to this post by Milan Crha
On Mon, 2017-03-13 at 10:15 +0100, Milan Crha wrote:
> On Sat, 2017-03-11 at 11:26 +0000, Patrick O'Callaghan wrote:
> > Since you say you are new to mailing lists
>
> Hi,
> I thought the default for the list is to not use the digest, thus the
> new subscribers receive messages separately, unless they change it for
> whatever reason. I think I heard so several months ago, but I can be
> wrong.

It is the default (if it wasn't we'd be having a lot more of these).
The OP must have changed it.

poc
_______________________________________________
evolution-list mailing list
[hidden email]
To change your list options or unsubscribe, visit ...
https://mail.gnome.org/mailman/listinfo/evolution-list
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: evolution-list Digest, Vol 140, Issue 6

Brewster Gillett
On Mon, 2017-03-13 at 10:04 +0000, Patrick O'Callaghan wrote:
On Mon, 2017-03-13 at 10:15 +0100, Milan Crha wrote:
> On Sat, 2017-03-11 at 11:26 +0000, Patrick O'Callaghan wrote:
> > Since you say you are new to mailing lists
> 
> 	Hi,
> I thought the default for the list is to not use the digest, thus the
> new subscribers receive messages separately, unless they change it for
> whatever reason. I think I heard so several months ago, but I can be
> wrong.

It is the default (if it wasn't we'd be having a lot more of these).
The OP must have changed it.

poc

bg:

"Digest" should have been strangled in its crib. Its only discernible trait is its ability to
encourage clueless list behaviours, thereby annoying the clueful :-)

But seriously, folks; on quite a few listservs over quite a few years, I have implored
"Digest" users to explain to me what advantages they feel it confers on them, and so far
n0t a single one of them has ever come up with anything even remotely plausible, beyond
the questionable ability to live in denial about how many email messages they're getting....

Brewster
-- 
***********************************************************************
"Unless something is done -- and soon, to relieve the massive  buildup 
 of excess tax receipts, the Treasury Building will explode and release
 its contents into the atmosphere, forming  an immense cloud of money...
 If the wind were to shift, the money could fall back to Earth, where 
 some of it could, conceivably, wind up -- this is referred to in 
 top-secret government documents as 'The Doomsday Scenario' -- back
 in the hands of taxpayers."

	Dave Barry, humor columnist, February 1999
***********************************************************************
 W. Brewster Gillett            [hidden email]            Portland, OR  USA
***********************************************************************
 Simply because you don't like to hear it, that doesn't make it untrue.
***********************************************************************


_______________________________________________
evolution-list mailing list
[hidden email]
To change your list options or unsubscribe, visit ...
https://mail.gnome.org/mailman/listinfo/evolution-list
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: evolution-list Digest, Vol 140, Issue 6

Patrick O'Callaghan
On Mon, 2017-03-13 at 09:51 -0700, Brewster Gillett wrote:
> But seriously, folks; on quite a few listservs over quite a few years, I
> have implored
> "Digest" users to explain to me what advantages they feel it confers on
> them, and so far
> n0t a single one of them has ever come up with anything even remotely
> plausible, beyond
> the questionable ability to live in denial about how many email messages
> they're getting....

This isn't a "listserv" as you call it. It's a mailing list managed by
the Mailman software, which unfortunately has digests as a basic
feature.

However a quick perusal of the admin options tells me that it can be
turned off. I'll propose doing this in a separate thread so members can
give their views.

poc
_______________________________________________
evolution-list mailing list
[hidden email]
To change your list options or unsubscribe, visit ...
https://mail.gnome.org/mailman/listinfo/evolution-list
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: evolution-list Digest, Vol 140, Issue 6

Ralf Mardorf-3
In reply to this post by Patrick O'Callaghan
On Sat, 2017-03-11 at 11:26 +0000, Patrick O'Callaghan wrote:
> If you absolutely must use digests, you can reply to an individual
> message by right-clicking within the message body.

Assuming the OP in addition didn't accidently changed the default "mime"
to "plain text" for digest mails ;).



_______________________________________________
evolution-list mailing list
[hidden email]
To change your list options or unsubscribe, visit ...
https://mail.gnome.org/mailman/listinfo/evolution-list
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: evolution-list Digest, Vol 140, Issue 6

George Reeke
In reply to this post by Patrick O'Callaghan
On Mon, 2017-03-13 at 17:15 +0000, Patrick O'Callaghan wrote:

> However a quick perusal of the admin options tells me that it can be
> turned off. I'll propose doing this in a separate thread so members can
> give their views.
>
> poc

Please do not turn digests off on all lists.  Although I do not use
them on lists like this one, where I participate, I find them very
useful on other lists where I just want to keep up a bit and would
rather not be bothered with all the individual items coming in at
random intervals.

George Reeke


_______________________________________________
evolution-list mailing list
[hidden email]
To change your list options or unsubscribe, visit ...
https://mail.gnome.org/mailman/listinfo/evolution-list
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: evolution-list Digest, Vol 140, Issue 6

Pete Biggs

>
> Please do not turn digests off on all lists.  Although I do not use
> them on lists like this one, where I participate, I find them very
> useful on other lists where I just want to keep up a bit and would
> rather not be bothered with all the individual items coming in at
> random intervals.
>
It's a list specific thing, it won't affect anything other than
evolution-list.

P.
_______________________________________________
evolution-list mailing list
[hidden email]
To change your list options or unsubscribe, visit ...
https://mail.gnome.org/mailman/listinfo/evolution-list
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: evolution-list Digest, Vol 140, Issue 6

Patrick O'Callaghan
In reply to this post by George Reeke
On Mon, 2017-03-13 at 13:31 -0400, George Reeke wrote:

> On Mon, 2017-03-13 at 17:15 +0000, Patrick O'Callaghan wrote:
>
> > However a quick perusal of the admin options tells me that it can be
> > turned off. I'll propose doing this in a separate thread so members can
> > give their views.
> >
> > poc
>
> Please do not turn digests off on all lists.  Although I do not use
> them on lists like this one, where I participate, I find them very
> useful on other lists where I just want to keep up a bit and would
> rather not be bothered with all the individual items coming in at
> random intervals.

I only have (some) control over the Evolution list.

Notwithstanding that, I don't understand your problem with not having
digests. Don't you filter list traffic into folders?

poc
_______________________________________________
evolution-list mailing list
[hidden email]
To change your list options or unsubscribe, visit ...
https://mail.gnome.org/mailman/listinfo/evolution-list
Loading...